流量：4.72L/H，壓力：8.75Bar，美國帕斯菲達pulsafeeder機械隔膜計量泵X230加藥泵

 200、250系列機械隔膜計量泵 流量：4.72L/H，壓力：8.75Bar，美國帕斯菲達pulsafeeder機械隔膜計量泵X230加藥泵的詳細介紹

*為特殊使用場所而設(shè)計之高壓計量泵 *高效率風冷式馬達，油浸式齒輪箱 *金屬增強隔膜，短距離動作沖程，壽命長 *計量**，輸出量可隨意調(diào)整 *高扭力齒輪組，確保高壓力時順利啟動運轉(zhuǎn)

Often it is desirable to provide chemical feed near the intake of the pump for additional retention time and mixing of the chemicals. An additional length of discharge tubing will be required for this installation. Tape the end of the discharge tubing to the pump cylinder drop pipe, or foot valve and lower it into the well. An anti-siphon valve must be installed on systems such as this where the discharge is lower than the pump and the chemical storage tank. Failure to install anti-siphon valve will cause siphoning to occur.
NOTE: Series 200 pumps are employed for hundreds of different industrial and agricultural applications, due to the wide range of outputs, pressure ratings, and materials of construction available. When in doubt, consult the factory or your distributor for other specific application and installation information.